Login to UKOBD

Info: Your browser does not accept cookies. To put products into your cart and purchase them you need to enable cookies.

ScanGauge E inc cable to connect to ScanGauge2

ScanGauge E inc cable to connect to ScanGauge2


UKOBD are the longest established UK Distributor of the ScanGauge by Linear Logic.  We back this up with a UK-based technical team, able to repair damaged ScanGauge products in-house and provide technical support via our online ticketing system.

The New ScanGauge-e
We are now distributing the exciting new ScanGaugeE tool in Europe. This can be used as a complete stand-alone tool, or as an add-on to the ScanGauge2 (1m black interface cable included)

Compatible with all EOBD compliant vehicles (2001+ petrol cars, 2004+ diesel cars and 2007+ light commercials).  If you are unsure of compatibility please contact support)

Real-time Graphic Feedback

Use Up To 33% less Fuel

ScanGaugeE™ provides you with real-time information about your vehicle’s fuel economy through an intuitive graphic display. According to a report issued by the US government, adjusting your driving habits can increase fuel economy by up to 33%. Use the instant feedback provided by ScanGaugeE™ to adjust your driving style and improve your fuel economy.

Track Your Fuel Cost

Screen showing current CO2 (CO2), the Trip CO2 (TCO) and Real-time Fuel Economy Graphic Feedback.Track your fuel costs and fuel used in real-time. View information such as miles-per-gallon, gallons-per-hour and Trip Fuel Used. Track actual fuel costs with Trip-Fuel-Costs and Today’s-Fuel-Costs digital gauges.

Monitor Your Carbon Footprint

Screen showing Trip Fuel Costs (TFC), the Days Fuel Cost (DFC) and Real-time Fuel Economy Graphic Feedback.Track your vehicle’s CO2 output in real-time. View information such as Current-CO2 and Trip-CO2. You can also track the days Total CO2 and Total CO2 for the tank within the built-in Trip Computers.

An Ultra Compact Design that Installs In Minutes

ScanGaugeETM installs in just minutes without tools and does not require batteries or an external power source. All data and power are derived from the single OBDII connection.

The detachable six (6) foot cord also allows ScanGaugeE™ to be mounted just about anywhere on the dash or console while staying connected to your vehicle.

Automatic Trip Computers

Five built-in trip computers keep track of everything from fuel cost, distance traveled your vehicle’s CO2 footprint and much more.

The CURRENT trip is restarted after the engine has been off for more than 3 minutes. The TODAY trip is restarted after the vehicle has not moved for 9 hours. The data from TODAY is moved to PREVIOUS DAY when it is restarted. This way, you don’t have to reset the trip computers when you start a trip. There is also a TANK Trip which you reset when you fill up the tank. It can provide you with “to empty” data as well as other useful information. The information is available anytime during the trip. The CURRENT trip can be reset. This is useful for making fuel economy measurements at a steady speed.

The GAUGE mode can display instantaneous fuel economy, but small variations in throttle, terrain or even wind will cause this to wander around some. The CURRENT trip computer and its RESET capability can smooth this out over a longer distance.

The TRIP modes in the ScanGauge II can be used to save fuel. Improved driving habits can improve fuel economy by up to 30% according to a US Government source. The ScanGauge II lets you try different driving techniques and routes and gives quick feedback on how they affect fuel use.

Built-in Trip Computers  
Trip ComputerDisplay NameAvailable InformationDisplay Name
Current CurrentAvererage Fule EconomyFUEL ECO
Trip Fuel UsedFUEL USE
Todays TripTODAYMaximium Coolant TempuratureWT MAX
Trip DistanceDIST
Maximum Engine RPMMAX RPM
Previous TripPREV DAYTrip Elapsed TimeHOURS
Maximum SpeedMAX SPD
Tank TripTANKAverage SpeedAVG SPD
Trip Fuel CostCOST
Trip C02 ProductionC02
Tank To EmptyTO EMPTYFuel RemainingFUEL
Distance Remaining Before Tank is EmptyDISTANCE
Time Remaining Before Tank is EmptyHOURS

Built-in Digital Gauges

The ScanGaugeE can display up to 2 digital gauges at one time along with the a real-time fuel efficiency feedback graph

The ScanGaugeE features more then 18 built-in digital gauges that can be displayed two at a time along with the real-time fuel efficiency feedback graph. The ScanGaugeE also features pre-defined gauge screens for fuel efficiency (MPG & AVG), CO2 production (CO2 & TCO) and Trip Cost (TFC & DFC) along with 2 custom screens you can use to setup your own default gauge set.

The gauges and the graph are updated in real-time as you drive to provide you the kind of real-time feedback that can help you learn to raise your fuel economy and reduce your carbon footprint – regardless of the type of vehicle you drive.

You can also change the unit of measure between standard and metric, as well as adjust the update rate to one of three pre-set speeds (slow, normal and fast).

Digital GaugeNameDescription
Fuel System Loop StatusThis indicates when the oxygen sensor is being used to control the mixture (closed-loop) and when it is not (open-loop). It is usually closed except when the engine is cold or under full throttle acceleration.
Manifold Absolute Pressure
This indicates the pressure in the intake manifold. It is reported in Pounds per Square Inch (PSI) by default but can be changed to kilo-pascals (KPA) if desired.
If the engine is turbocharged or supercharged, you can set ScanGaugeII to calculate and display this gauge as Boost (BST) through the Advanced Setup parameters
Miles Per Gallon
Kilomteres Per Gallon
Miles Per Liter
Liters Per 100Km
Kilomteres Per Liter
Instant fuel economy is updated about every 2 seconds at the NORMAL update rate . Small changes in throttle position or load while driving will show almost immediate changes in this gauge.
Miles Per Hour
Kilometers Per Hour
Speed in the units selected
RPMRevolutions Per MinuteThe RPM of the engine
TPSThrottle Position SensorIn some vehicles, a closed throttle will read 0 and full throttle will read 100. Other vehicles will have a higher value than 0 for a closed throttle and a full throttle value less than 100.
Water TemperatureWater/Coolant temperature
A vehicle with a 50/50 mix of coolant and water will not boil over until about 265? F at sea level. This will be reduced at higher elevations.
AVGAverage Fuel EconomyThis is the current average fuel economy and is updated about every 2 seconds (normal rate).
TFCTrip Fuel CostThis is the total fuel cost for the current trip.
CPMCost Per MileCost of fuel per mile at this time
VLTBattery VoltageNormal running battery voltage is between 13 and 15. When the engine is off it should be between 11 and 13. Voltages higher than 15 volts can damage batteries and electrical components. Voltages below 13 when the vehicle is running could indicate poor charging of the battery. Voltage below 11 when the engine is off could indicate a low battery charge or a shorted battery cell.
Intake Air TemperatureTemperature of the air going into the engine. At highway speeds, this will typically be a few degrees higher than the outside air temperature. At idle or low speed, it may be much higher in temperature than the outside temperature due to the low airflow into the engine and the high under-hood temperatures warming it up.
FPRFuel PressureThis is the fuel pressure from the fuel pump. Very few vehicles report this.
Gallons Per Hour
Liters Per Hour
Fuel consumption rate in the selected units. This is sensitive to throttle, gear and loading changes.
IGNIgnition TimingShows the amount of timing advance (or retard). The more advance there is (or less retard), the better for fuel economy and power. The limit is set by the octane of the fuel, the intake air temperature, and the load on the engine. A lower than normal amount of advance for similar temperature and speed could indicate too low an octane of fuel is being used.
LODEngine LoadingThis is a percentage of the maximum power available currently being generated. In some vehicles it is the maximum available at the present RPM.
DFCDay's Fuel CostThis is the total fuel cost for all trips for the current day
CO2Currnet Carbon DioxideThis shows the amount of CO2 your vehicle has produced durring the current trip.
TCOToday's Carbon DioxideThis shows the total amount of CO2 your vehicle has produced durring the current day.

We hold the ScanGaugeE in stock in the UK, and orders are processed & sent out the same day if received by 3.30 GMT Mon-Fri.

If you want to find out more details about this product, please click (http://www.ukobd.co.uk/General/scangauge-documents.html) for further document downloads.

Alternatively, If you wish to know more about this or any other product, please call us on: 01452 348128 Mon-Fri 9am - 5pm



Product Search

Type B EOBD/OBD2 Enclosure

Type B EOBD/OBD2 Enclosure

Sprinter to EOBD/OBD Convertor Cable

Adaptor cable for Mercedes-Benz Sprinter van.


OBDII/EOBD is not the standard for large diesel powered vehicles such as lorries, coaches, trucks and diesel pusher RVs. These type of vehicle rely on the J1939 and J1708 protocols. Vehicle diagnostic tools for these vehicle are expensive.

ScanGauge2 Firmware Upgrade

If you have a ScanGauge2 with old firmware, we are now offering a fixed cost firmware upgrade to the latest firmware version.

ScanGauge Mount

If the velcro pad supplied with the ScanGauge does not meet your needs, this product allows you to mount any of the ScanGauge range on your dashboard (with supplied plate) or windscreen.

ScanGauge E inc cable to connect to ScanGauge2

ScanGaugeE™ provides you with real-time information about your vehicle’s fuel economy through an intuitive graphic display. According to a report issued by the US government, adjusting your driving habits can increase fuel economy by up to 33%.

ScanGauge Additional/Extra Cable

Additional/Extra cable for ScanGauge2 or ScanGaugeE models.

PCMSCAN Software

PCMSCAN is a fully featured generic EOBD/OBD-II scanner and diagnostic tool that supports a wide variety of EOBD/OBD-II hardware interfaces. It allows viewing, charting, logging and playback of diagnostic data in real time via the vehicle's EOBD/OBD-II di

OpelScanner Pro Upgrade

Upgrade from OpelScanner CAN to PRO version

Opelscanner CAN

OpelScanner is a comprehensive fault diagnostic system for Vauxhall and Opel cars covering models from 1996 to 2012. The PC-based tool offers high-end fault diagnostic features at a highly competitive price.

Multiple ECU Simulator

Multiple Protocol OBD ECU Simulator according to SAE J1979 and to ISO 15031-5 Simulates a single or 4 different ECU's (PCM, TCM, HEC, ABS) Simulates ISO9141-2, KWP2000, J1850 PWM, J1850 VPWM, CAN

Mongoose PWM

Mongoose is a low-cost, high-performance vehicle network interface that connects a laptop directly to the OBD-II connector, includes a J2534 driver and delivers full-speed (12mps) USB 2.0 performance.